Machinery and Systems for the Architectural,
Woodworking, & Composite Panel Industries

The process temperature control specialists
///[ Product Range: 3 kW - 150 kW heating capacity ]///



TT-168 E

Powerful temperature control unit
Operational use: With water up to 90°C, moulds up to 1'200 kg
With oil up to 150°C, moulds up to 600 kg
Technical data:
Heating capacity: 12 kW (water), switchable to 6 kW oil operation
Cooling capacity: 20 kW at 90°C
Pump capacity: Motor 0,75 kW, max. 4,5 bar / max. 75 l/min
Dimensions: Length: 710 x Width: 325 x Height: 785 mm, incl. castors and handels
Weight: approx. 67 kg (empty)
Special features:
Digital flow indication: Indication of flow rate in litres and gallons and control of the minimum flow. As soon as the flow falls below a minimum, the alarm is activated.
Lime-free heat exchanger: The lime scale free heat exchanger is a special construction made of stainless steel
Leakstopper device and mould drain: Unit can be used in pressure or vacuum mode
All components in contact with water are made of stainless steel. Pump made of bronze, Quality is equivalent to V2A.

Included Features

  • MP-888 microprocessor controller
  • Automatic temperature control that activates alarm when the actual temp deviates 5+ °C from the set temp
  • Automatic aeration / venting
  • Automatic water refill
  • Automatic mold drain
  • Switchable stages for varied heating capacities (3 kW oil operation to 9 kW water operation)
  • Highly audible alarm system
  • Leak stopper- operates in pressure or vacuum mode to allow continuous production despite leakage from mold or connections
  • Limescale-free heat exchanger
  • Corrosion-free unit.  All components in contact with water are made of stainless steel or bronze.
  • Castors
  • Safety Devices:

    - Level control provides auto dry run protection

    - Separate mechanical safety thermostat

    - Temperature limiter installed in the controller

    - Motor protection switch, transformer, insulation

< back to Tool-Temp Products page >